Product ID:VINYLIDENE CHLORIDE, 395-396
MSDS Date:09/01/1990
FSC:6810
NIIN:00N047328
MSDS Number: BTQWB

Emergency Phone: 716-265-0413

Info Phone: 716-265-0413

Cage: 0MWG0

Telephone: 716-265-0413

Cage: 0MWG0

VINYLIDENE CHLORIDE/ACRYLONITRILE COPOLYMER

CAS: 9010-76-8

Fraction By Weight: 100%

OSHA PEL N/K

ACGIH TLV: N/K

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE AND RESPIRATORY IRRITANT. EXTREME
INHALATION OF VAPORS CAN CAUSE DEATH BY PARALYSIS OF THE
RESPIRATORY CENTER. HEADACHE, TIREDNESS AND NAUSEA ARE OTHER
EFFECTS.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INGEST:CALL MD IMMEDIATELY . INHAL:REMOVE FROM EXPOSURE. IF
BREATHING STOPS, BEGIN MOUTH TO MOUTH. EYES:FLUSH WITH WATER FOR AT
LEAST 15 MINUTES. SKIN:WASH AFFECTED AREA WITH SOAP AND WATER. REM
OVE DIRTY CLOTHING. IN ALL CASES, IF IRRITATION DEVELOPS, SEEK
MEDICAL ASSISTANCE.

Extinguishing Media:WATER FOG, CO*2.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AGAINST HCL IF
RESINS ARE EXPOSED TO FIRE CONDITIONS.
Unusual Fire/Explosion Hazard:NONE KNOWN.

Spill Release Procedures:SWEEP UP AND DISCARD. USE APPROPRIATE SAFETY
EQUIPMENT.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:AVOID BREATHING VERY DUSTY ATMOSPHERE.
Other Precautions:NOTE:THIS MATERIAL IS INTENDED FOR LABORATORY USE
ONLY. IT IS NOT INTENDED FOR DRUG, HOUSEHOLD OR OTHER USES.

Respiratory Protection:IF NEEDED. NIOSH/MSHA APPROVED RESPIRATOR
APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKER GOGGLES .
Other Protective Equipment:NOT APPLICABLE.
Work Hygienic Practices:GOOD HYGIENE PRACTICES SHOULD BE STRICTLY
FOLLOWED.
Supplemental Safety and Health
% VOLAT:2% MAX. (WATER).

HCC:N1
Spec Gravity:0.575 (BULK)
Solubility in Water:INSOLUBLE
Appearance and Odor:BUFF COLORED POWDER, SLIGHT ODOR
Percent Volatiles by Volume:SUPDAT

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIAL.
Stability Condition to Avoid:HIGH TEMPERATURES ABOVE 130F, PRODUCT
FORMS YELLOW COLOR, WHEN BURNED, RESIN FORMS CARBON RESIDUE PLUS
HCL.
Hazardous Decomposition Products:CARBON RESIDUE, HCL.

Waste Disposal Methods:BURN IN AN INCINERATOR EQUIPPED TO HANDLE HCL
FUMES, OR BURY IN APPRVD LANDFILL. DISPOSE IN ACCORDANCE WITH
FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.